3D printer repair with doorstep pickup across India
We collect your printer by insured courier and send a written quote before any work starts.
No account needed. It takes about a minute.
What’s wrong with your printer?
KSP service tagTag KSP-88219
- Warranty
- Active to Mar 2027
- AMC
- KSP-Care+, 1 of 3 visits used
- 12 Mar 2026InstalledSet up on site, test print signed off
- 04 Jul 2026AMC visit 1Belts tensioned, 0.4 mm hardened nozzle fitted
- 18 Sep 2026KSP-R-01842AMS feeder motor replaced under warranty
- Dec 2026AMC visit 2 due
Printers we service, with genuine parts and authorised expertise
How a repair works
No repair work you haven’t approved, and no repair you can’t see the details of.
- 1
Report the fault
Book online in about a minute, or scan the QR tag on your printer. Tell us the model and what it’s doing.
- 2
Pickup or drop-off
We arrange insured courier pickup from 500+ cities, or you bring it to our Hyderabad workshop.
- 3
Approve the quote
An engineer inspects it and sends a written estimate with photos. Nothing is done until you approve it.
- 4
Tested and returned
Repaired with genuine OEM spares, checked with a calibration print, and every part logged to the tag.
Step 1 takes about a minute. No account needed.
What we do
Repair
Diagnosis, genuine parts and workmanship for printers that have stopped, jammed or lost quality.
Report a faultInstallation
On-site setup, first test print and operator training, signed off by you on the day.
Book an installation on WhatsAppAnnual maintenance
Three preventive visits a year with wear-and-tear spares included. Enrol within 7 days of purchase.
See AMC plansWarranty claims
We keep the record of what your machine is covered for and take claims to the supplier for you.
Sign in to see your coverFor colleges, labs and print farms
One contract for every machine, with each printer’s history on its own tag for your asset audits.
Ask about a lab contract- GST invoices, purchase orders and vendor registration
- Fleet visits scheduled around semesters or production runs
- 48-hour parts turnaround for print farms
- Abrasive-material setup and NDA-covered work for R&D teams
Common faults and how we fix them
Desktop printers, high-speed CoreXY farms and resin machines. Pick the fault that matches and we’ll start the report for you.
Clogged extruder or hotend
What you see: Clicking gears, ground filament, heat creep, thermal runaway errors.
What we do: Hotend decarbonised or rebuilt, bi-metal heatbreak fitted, hardened nozzle swapped in.
Report this: Clogged extruder or hotendBed levelling and first layer
What you see: Warped prints, nozzle scraping the PEI sheet, uneven first layer.
What we do: Probe calibration, bed re-trammed, Z lead-screw backlash removed.
Report this: Bed levelling and first layerMainboard, drivers and power
What you see: Won’t boot, blown MOSFET, stuttering steppers, dead 24 V supply.
What we do: Component-level board repair, stepper driver replacement, firmware reflashed.
Report this: Mainboard, drivers and powerAMS and multi-material feeding
What you see: Retraction failures, blinking red slot LED, worn PTFE tubes.
What we do: Feeder motor and cutter blade replaced, buffer tension recalibrated.
Report this: AMS and multi-material feedingResin printer screen and UV
What you see: Holes in cured prints, cracked mono LCD, cloudy FEP film.
What we do: 4K/8K/12K LCD replaced, FEP re-tensioned, UV array checked for uniformity.
Report this: Resin printer screen and UVCoreXY belts and high-speed quality
What you see: Ghosting, ringing, layer shifts at speed, noisy rails.
What we do: Belts tensioned by frequency, input shaping retuned, linear bearings cleaned.
Report this: CoreXY belts and high-speed quality
Clogged extruder or hotend
What you see: Clicking gears, ground filament, heat creep, thermal runaway errors.
What we do: Hotend decarbonised or rebuilt, bi-metal heatbreak fitted, hardened nozzle swapped in.
Report this: Clogged extruder or hotendBed levelling and first layer
What you see: Warped prints, nozzle scraping the PEI sheet, uneven first layer.
What we do: Probe calibration, bed re-trammed, Z lead-screw backlash removed.
Report this: Bed levelling and first layerMainboard, drivers and power
What you see: Won’t boot, blown MOSFET, stuttering steppers, dead 24 V supply.
What we do: Component-level board repair, stepper driver replacement, firmware reflashed.
Report this: Mainboard, drivers and powerAMS and multi-material feeding
What you see: Retraction failures, blinking red slot LED, worn PTFE tubes.
What we do: Feeder motor and cutter blade replaced, buffer tension recalibrated.
Report this: AMS and multi-material feedingResin printer screen and UV
What you see: Holes in cured prints, cracked mono LCD, cloudy FEP film.
What we do: 4K/8K/12K LCD replaced, FEP re-tensioned, UV array checked for uniformity.
Report this: Resin printer screen and UVCoreXY belts and high-speed quality
What you see: Ghosting, ringing, layer shifts at speed, noisy rails.
What we do: Belts tensioned by frequency, input shaping retuned, linear bearings cleaned.
Report this: CoreXY belts and high-speed quality
Annual maintenance, priced by your printer
Available only within 7 days of buying the printer.
Three preventive visits a year with wear-and-tear spares included, for one printer or a whole lab. The price depends on what the printer cost, and every visit is logged to its tag.
See what AMC covers| Printer price | AMC per year |
|---|---|
| ₹10K – ₹25K | ₹3,449 + GST |
| ₹26K – ₹50K | ₹5,199 + GST |
| ₹51K – ₹75K | ₹5,749 + GST |
| ₹76K – ₹100K | ₹6,299 + GST |
| ₹101K – ₹150K | ₹8,049 + GST |
| ₹151K – ₹200K | ₹9,199 + GST |
Before you book
Something else on your mind? Ask us on WhatsApp.
Do I need an account to book a repair?
No. Report the fault with your phone number and you get a ticket number to track it. An account is only needed to see warranty and AMC details.
Will any repair work start before I agree?
No. An engineer inspects the printer and sends a written estimate with photos, and no repair work starts until you approve it. If you decline, the printer is returned; diagnosis charges may apply as per our terms.
I’m not in Hyderabad. Can you still repair my printer?
Yes. We arrange insured courier pickup from 500+ cities across India and send the printer back the same way. If you are nearby, you can drop it at our Hyderabad workshop.
Which printers do you repair?
Bambu Lab, Creality, Flashforge, Elegoo, QIDI, Phrozen, Anycubic, Prusa, Snapmaker, and most other FDM and resin printers.
How do I track my repair?
Open Track a repair and enter your ticket number and mobile number. If your printer has a KSP tag, scanning its QR code shows the same history.
Can I get a GST invoice?
Yes. We issue GST invoices, and work with purchase orders and vendor registration for colleges and companies.
Printer stopped working?
Report it in about a minute. We’ll arrange pickup, tell you how to pack it, and send a written estimate before any work starts.